Specifications

• Dimensions CPAP – HxWxD 4.6” x 6.5” x 5.7” @ 2.9 lbs
• Heated Humidifier (H4i) HxWxD 5.0” x 6.7” x 8.3” @ 1.6 lbs
• Symbols which appear on the device; Attention, consult accompanying documents; Drip proof; Type CF equipment; Dangerous voltage; Class II equipment; Start/Stop.
• Operating pressure range 4 to 20 cm H2O
• Dimensions (H x W x D) 4.6” x 6.5” x 5.7” (112 mm x 164 mm x 145 mm)
• Weight 2.9lb (1.3 kg)
• Power Supply • Input range for S8 Escape II with HumidAire 3i:100–240V, 50/60Hz; 110V, 400Hz; 2.5A < 140VA (110W) (maximum power consumption).
• Instantaneous peak power consumption <340VA.
• Refer to the DC-12 converter instructions for DC ratings. Only use the ResMed DC-12 converter for DC input.
• Typical power consumption at 20 cm H20 is 34VA or 20W.
• Air Filter Two-layered, powder-bonded, polyester non-woven fiber
• Air Tubing Flexible plastic, 6’6” (2 m)
• Air Outlet The 22 mm conical outlet complies with EN 1281-1 IEC 60601-1
• Classifications Class II (double insulation), Type CF
• Noise Level Radiated sound pressure is measured at <30dBA at 10 cm H2O and3’3.36” (1 m) according to ISO17510-1.
• Supplemental Oxygen Recommended maximum supplemental oxygen flow: 4 L/min
• Housing Construction Flame retardant engineering thermoplastic Operating Temperature +41ºF to +95ºF (+5ºC to +35ºC)
• Operating Humidity 10%–95% non-condensing
• Storage and Transport Temperature -4ºF to +140ºF (-20ºC to +60ºC)
• Storage and Transport Humidity 10%–95% non-condensing
• Operating Altitude Sea level to 8500’ (2591 m)
• Electromagnetic Compatibility

Product complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC60601-1-2, for residential,commercial, and light industry environments.

The electromagnetic compatibility tables for these ResMed devices can be found on www.resmed.com, on the Products page under Service & Support. Click on the PDF file for your device.

Note: The manufacturer reserves the right to change these specifications without notice.