AirCurve 10 ST

Item # 37306

Technical Specifications

• Dimensions BiPAP (H x W x D): 4.6” x 6.5” x 5.7” @ 2.9 lbs
• Heated Humidifier (H4i) (H x W x D): 5.0” x 6.7” x 8.3” @ 1.6 lbs
• Symbols which appear on the device: Attention, consult accompanying documents; Drip proof; Type CF equipment; Dangerous voltage; Class II equipment; Start/Stop; Manufacturer.
• Operating pressure range: 3 to 25 cm H2O
• Maximum single fault steady state pressure: 40 cm H2O
• Pressure measurement tolerance: ±0.5 cm H2O ± 4% of the measured reading
• Flow measurement tolerance: ±0.1 or 20% of reading, whichever is greater
• VAuto mode: 4 to 25 cm H2O (measured at the mask); Min EPAP: 4 cm H2O; Max IPAP: 25 cm H2O; Pressure Support: 0 to 10 cm H2O S, ST and T modes IPAP: 4 to 25 cm H2O (measured at the mask); EPAP: 3 to 25 cm H2O (measured at the mask);
• Pressure Support: 0 to 22 cm H2O
• CPAP mode: 4 to 20 cm H2O (measured at the mask)
• DECLARED DUAL-NUMBER NOISE EMISSION VALUES in accordance with ISO 4871
• Sound pressure level: 26 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1: 2002
• 28 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2007
• Sound power level: 36 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2007
• Dimensions (L x W x H): 4.4” x 6.5” x 5.7” (112 mm x 164 mm x 145 mm)
• Weight: 2.9 lbs (1.3 kg)
• Power supply Input range :100–240 V, 50–60 Hz, 40 VA (typical power consumption), < 100 VA (maximum power consumption)
• Housing construction: Flame retardant engineering thermoplastic
• Operating temperature: 41ºF to 95ºF ( 5ºC to 35ºC)
• Operating humidity: 10–95% non-condensing
• Storage and transport temperature: -4ºF to 140ºF (-20ºC to 60ºC)
• Storage and transport humidity: 10–95% non-condensing
• Operating altitude: Sea level to 8,500’ (2,600 m)
• Supplemental oxygen: Recommended maximum supplemental oxygen flow: 4 L/min (VAuto mode); 15 L/min (CPAP, S, ST and T modes)
• Electromagnetic compatibility: Product complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC60601-1-2, for residential, commercial, and light industry environments
• Air filter: Two-layered, powder-bonded, polyester non-woven fiber
• Air tubing: Flexible plastic, 1 x 6’6” (2 m)
• Air outlet: The 22 mm conical air outlet complies with ISO 5356-1
• IEC 60601-1 classification Class II (double insulation), Type CF

Note: The manufacturer reserves the right to change these specifications without notice.